T-Slot Kits
The original MITEE-BITE T-Slot Clamp combines our unique cam action clamping element with a T-nut.
Locks in machine T-slot for low profile clamping.
Makes fast set-ups possible
T-Slot Clamps
The original MITEE-BITE T-Slot Clamp combines our unique cam action clamping element with a T-nut.
Locks in machine T-slot for low profile clamping.
Makes fast set-ups possible
Strap Clamps
This low profile design promotes superior clamping in both normal and restricted areas with minimal tooling interference.
Heat treated 17-4 P.H. stainless steel
Guaranteed for li
Kopal Mono-Bloc Clamps
The Mono-bloc clamp is the quickest and easiest way to clamp parts on a Bridgeport-type mill.
One of the fastest and strongest milling clamps available anywhereModular des
TalonGrip™ Vise Jaw Systems
Mitee-Bite Products introduces a new and innovative product that will increase the functionality of your standard 4, 6, and 8 inch (100mm, 150mm and 200mm) vises. Ta
KOPAL® Mono-Bloc Chain Clamp
The Mono-Bloc Chain Clamp is a simple and rapid workholding solution for a wide array of applications. The Chain Clamp offers fast and powerful clamping with forces
VersaGrip™ Vise Jaws
VersaGrip™, as the name implies, offers the versatility of clamping standard vise work as well as providing a solution for difficult applications that would normally requ
Series-9 Clamps
This adjustable low profile, cam action clamp provides clamping of different size workpieces merely by rotating the clamp to one of its other edges. The clamps are .394 (10mm) hig
Advant-Edge Clamps
The MITEE-BITE Advant-Edge Clamp provides additional clamping force and improved table grip.
Tilted clamping element creates a positive downward force and 4,000 lbs. holding f
Uniforce® Clamps
The compact, economical MITEE-BITE Uniforce® Clamp enables you to fixture more parts on the machine table. The specially designed steel wedge spreads the clamping force uniform
Side-Loc Xpansion Clamps
The Side-Loc Xpansion Clamp is actuated from the side, making it perfect for blind hole applications.It’s produced for both mill and lathe applications. The cam shaft a
OK-VISE® Clamps
THREE-DIMENSIONAL MACHININGDue to a low-profile design of OK-VISE® Clamps, it is possible to execute flexible three-directional machining of workpieces with one fastening. This ab
Vise Pallet
Now you can run those fixture jobs without removing your vises.
Vise Pallets are designed to fit in all 6 inch(150mm) vises and measure approximately 6×8and 6×10 inches (150x20
Multi-Fixture Clamps and Stops
The MITEE-BITE Multi-Fixture Clamp offers increased versatility through its unique riser clamp design.
Provides flexible set ups for hard to hold parts
Works in
Modular Pitbull® Clamps
The Pitbull® Fixture Clamp is very well known for its low profile and positive down force. It is now available as a modular clamp in two styles.
The slotted Modular Pit
Machinable Uniforce® Clamps
The compact Mitee-Bite Uniforce® clamp is available with extra material on the clamping jaws so it can be machined to conform to the shape of your workpiece – enab
Machinable Pitbull® Clamps
The popular Pitbull® Fixture Clamp is now available in a machinable version. The clamp has positive down force and a very low gripping profile, reducing material cost
Machinable Fixture Clamps
These clamps, with the machinable steel washers, provide more flexibility for holding round or unusual shaped parts. Parts can be held directly to the fixture plate surf
Long Length Machinable Uniforce® Clamps
Mitee-Bite products introduces the long length Uniforce® Clamp with machinable jaws. The long length clamping jaws give you greater versatility to machin
Long length Channel (7075-T6) & Steel Wedge
This material is available in 20″ (508mm) lengths so clamps can be fabricated in different lengths to suit any requirement. Channel and steel wed
Locating Rails for Jigs and Fixtures
Is it taking too long to make a fixture to increase production?
Mitee-Bite Products makes fixture building easier and quicker with the addition of ready made
KOPAL® Mini Clamps
These low profile cam action clamps and stops have a holding force of 880 lbs. (3900N.) and have fingers that push the workpiece down before clamping, even on castings that ha
Knife Edge Clamps
Our Knife Edge Clamps can be used instead of the original brass hex clamps for clamping rough cut stock, castings and any material that requires a hardened clamping element. Same
ID Xpansion™ Clamps
The ID Xpansion™ clamp is the ideal solution to hold parts on an inside diameter for high density machining on vertical or horizontal machining centers. It can also be used
Fixture Clamps
The Cam Action MITEE-BITE Fixture Clamp is made up of two simple components: a hardened steel socket cap screw with an offset head and a brass hexagonal washer.
– Low profile for
Dyna-Force® Clamps
The majority of the Dyna-Force® clamp is below the surface of the fixture which provides excellent clamp support and makes for a very low profile. The clamp jaw slides on an an
Compact Toe Clamps
This cam action fixture clamp provides positive down force while using very little space on a fixture. Work pieces can be clamped in series by using the back surface of a clamp to
Vacuum Pump
We now offer an Electric Vacuum Pump/Air Compressor option for use with all of our vacuum systems or your current system. This unit is compact, quiet and guaranteed to run continuousl
TITANS of CNC Academy Kit
Mitee-Bite Products has just completed a new Kit for the TITANS of CNC Academy, helping to educate in the Art of Fixturing Series. In the kit students will rec
Tall Vise Jaw System
These Vise Jaws/Towers are designed to mount directly to your 4 or 6 inch vise elevating your workpiece into the 5 axis envelope. You already have the platform therefore this
Spring Loc™ and Sliding Stop™
The Spring-Loc™ is an extremely low profile (.072″) adjustable clamp capable of producing approximately 10 lbs. of clamping pressure depending on how much th
Rotary Vacuum Chuck
Yes, it’s true! A vacuum system for your lathe or rotary table which provides on option for those applications that cannot be held by traditional methods. Although initial
Quick Change Receiver and Blank Pallet
MITEE-BITE announces the addition of a cost effective simple Quick Change Receiver System allowing for the rapid change out and precise location of small fixt
OK-Vise® Multi-Rail System
The Multi-Rail System is a versatile fixturing system perfect for all machining centers. The addition of the new Speed Stop eliminates the need for the standard Stop (Pa
Modular In-Line Clamping System
Mitee-Bite announces the addition of our popular fixture clamps in a modular system. Clamps, grips and stops, designed to be fully adjustable while mounted on T-Slot
Locating Pins and Liners
Use our Diamond and Tapered pins to standardize your shop with a universal pattern, allowing fixtures to be quickly mounted to any machining center.
Designed with simpli
The Loc-Jaw® system was conceived to simplify, and allow greater tooling access and more versatility securing your parts when 4th and 5th axis machining. Designed to hold raw stock without a pre-op
Loc-Down® System
The Mitee-Bite Loc-Down® System was designed to be a programmer’s and operator’s dream for quickly and easily securing small to large aerospace parts. Its compact design al
Pitbull® Clamps
The revolutionary Pitbull® Clamp remains the lowest profile, highest holding force clamp in the industry today. High vertical and horizontal clamping forces are generated, consi
